Dark grey and rose gold tones for a striking new edition of the Tourbillon Chronometer No.36. Drawing inspiration from the John Arnold pocket chronometer No. 1/36, Arnold & Son pays homage in a contemporary yet faithful manner to one of the most historically significant chronometers.
The John Arnold Chronometer No. 1/36 or “Arnold 36” as it is more commonly called was not only the first pocket watch by John Arnold to use a larger movement with his “T” balance, but also the first to be referred to as a “chronometer” for its superior timekeeping capabilities. In this respect, the Tourbillon Chronometer No.36 is faithful, contemporary horological homage.
The new sober gunmetal coating of the case further highlights the mechanical complexity and haute horlogerie finishing of these magnificent timepieces. The gunmetal coating also pays tribute to the old English fine gunsmith tradition, which is closely related to traditional watchmaking and shares many common techniques.
Following the classical codes of traditional English chronometer movements, the main pivoting elements such as the wheels, barrels, the tourbillon, and others are each mounted on their own bridge. The triangular, multilevel bridges (no less than 13) are mostly skeletonized, providing a more contemporary sense of three-dimensional depth to the entire timepiece.
The tourbillon, a central element of this timepiece, is highlighted in a most magnificent manner. Held by a skeletonized and mirror-polished top bridge, the one-minute tourbillon features a typically Arnold & Son three-spoke design. Weighing mere fractions of a gram, the tourbillon cage consists of no less than 58 components.
Prominently positioned on the dial side, the tourbillon can also be viewed from the back, thanks to an opening in the main plate. The same kind of opening is made below the small seconds display, adding to the symmetry of the Tourbillon Chronometer No.36.
The apparent technical virtuosity of the Tourbillon Chronometer No.36 is not only a treat for the eyes, as the watch is a COSC certified chronometer; something of a rare achievement for a tourbillon-equipped timepiece.
The decorative haute horlogerie arts are also lavishly demonstrated in the Tourbillon Chronometer No.36. The entirely in-house conceived and manufactured A&S8600 caliber features a smooth sand-blasted main plate and bridges with chamfered and polished edges. The main plate and bridges are treated with a golden coating, echoing the aesthetics of the historical pocket watches made by John Arnold. The main plate also is set with several mirror-polished 18-karat gold chatons, while the wheels in the gear train are embellished with circular satin finishing with chamfered and polished edges. Even the screws are beveled and feature mirror-polished heads.
The heart of the watch, the tourbillon, features a traditional construction with a top bridge, while the mirror-polished cage has the signature Arnold & Son three-spoke design, making a complete turn in 60 seconds.
The double barrels, embellished with laser-engraving decoration, provide a considerable power reserve of 90 hours when fully wound.
Tourbillon Chronometer No.36
- Hand-wound manufacture Arnold & Son caliber, A&S8600
- Power reserve: Approximately 90 hours
- Small seconds
- Nickel-silver and steel movement 5N red gold treated bridges and main plate with haute horlogerie finishing
- Sand-blasted bridges with chamfered and polished edges
- 18-karat gold chatons
- Screws with beveled and mirror-polished heads
- Tourbillon cage: mirror-polished with hand-chamfered polished edges and circular satin-finished surfaces
- Inner bezel rhodium treated with black indexes
- Sandblasted stainless steel case with dark grey DLC (“gunmetal”) coating
- Diameter: 46mm
- Cambered sapphire with anti-reflective coating on both sides
- See-through sapphire case back
- Water-resistant: 30m
- Hand-stitched brown or black alligator leather
- 28 pieces